Results 1 to 3 of 3

Thread: Shifting CJ2a

  1. #1
    Junior Member
    Join Date
    Apr 2022
    Posts
    10

    Shifting CJ2a

    Does anyone have the proper procedure in shifting a 2A in and out of 4WD and Hi/Lo? Can you shift on the fly or do you have to stop. I'm having a complete rebuild on the transmission and transfer case, so I want to start of fresh with it.

  2. #2
    Senior Member
    Join Date
    Jan 2015
    Location
    E OK
    Posts
    338
    I always stopped to move either lever. I wouldn’t think it would be possible to do High and low on the fly because of the speed difference of the gears. In and out of 4wd might be doable if the front hubs are original or locked because everything should be turning about the same speed unless you have already lost traction.
    Jeff
    '51 CJ3A
    '47 CJ2A

  3. #3
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    2,567
    Jeff is on the money. You want it stopped when shifting the transfer case. It is not uncommon to have to "clutch it" in neutral to get the gears to mesh once and a while.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •