Page 2 of 8 FirstFirst 1234 ... LastLast
Results 11 to 20 of 71

Thread: Transmission????

  1. #11
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,155
    Doctor Dana!!!

  2. #12
    Member Skboyd's Avatar
    Join Date
    Sep 2021
    Location
    Bellville, ohio
    Posts
    82
    Lol, I knew the doctor could help me.
    That answered my the question in my head, if I could inspect from top cover. Thanks that helps for sure. You mentioned the poppet spring? Looking at the manual my understanding is the spring is in top cover and can be inspected after removing top cover.? Is that correct?

  3. #13
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,560
    Yes, they are in the cover. https://www.kaiserwillys.com/diagram...on-top-shifter Item 4. I am beginning to think I will never take a T90 cover apart and NOT find a broken spring.

    Take two springs and call me in the morning.

  4. #14
    Member Skboyd's Avatar
    Join Date
    Sep 2021
    Location
    Bellville, ohio
    Posts
    82
    Lol. Thanks doc! Hope my top feels better.
    With working to many hours thru the week, I plan to start the procedure this weekend. Will report back. Or ask more questions.
    Thank you once again.

  5. #15
    Member Skboyd's Avatar
    Join Date
    Sep 2021
    Location
    Bellville, ohio
    Posts
    82
    I meant my T 90.. good night

  6. #16
    Member Skboyd's Avatar
    Join Date
    Sep 2021
    Location
    Bellville, ohio
    Posts
    82
    Update...
    Drained oil, few small metal pieces. Also some metal flakes inside case, nothing big. Did as you describe wheels up and turn drive shaft. Did not hear anything or notice a broken gear or tooth. Now the reverse gear did have a couple sharp edges on teeth. Not all to rear side of gear.... like maybe it's not pushing all the way back maybe?... have not disassembled top part to inspect poppet spring yet.wanted to check in before doing so. My guess would be metal flakes from reverse gear not in correct position...

  7. #17
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,560
    Scott can you take a picture up close of the gears?

  8. #18
    Member Skboyd's Avatar
    Join Date
    Sep 2021
    Location
    Bellville, ohio
    Posts
    82
    Pics of transmission gears.
    Attached Images Attached Images

  9. #19
    Senior Member TJones's Avatar
    Join Date
    Apr 2018
    Location
    Akron, Ohio
    Posts
    1,155
    Looks like the input shaft may be missing a tooth down towards the drivers side bottom or just a piece of one.

  10. #20
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,560
    I do see that tooth TJ. I also don't see anything that would prevent reverse. The transmission has been shifted once or twice no question about it! Lots of wear on the clutching teeth. If that is a piece missing from the input gear, something must have went through the teeth.

    Scott, how do the teeth look? Does the input gear have broken teeth? Rotate the transmission gears and check all the teeth. The reverse idler needs a good look. Look at each tooth. If there are teeth missing on a gear that would be the issue. Does the cover shift properly on the bench?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •