Results 1 to 3 of 3

Thread: Body life CJ2A

  1. #1
    Junior Member
    Join Date
    Apr 2022
    Posts
    21

    Body life CJ2A

    I just put in my new transfer case and transmission along with installing body gaskets on the frame. The Tub rests right on top of the rear PTO plate on the tranfer case. Put a larger spacers between the tub and the frame?

  2. #2
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,560
    NAGC , first lower the transfer case cross member with four 1/2" thick spacers between the frame and the cross member bolts. Keep an eye on the firewall to engine clearance. as the cross member drops. If that isn't enough, then raise the body until it fits. I think dropping the cross member should do it. That will really help the drive shaft angles and the slip yoke engagement.

  3. #3
    Junior Member
    Join Date
    Apr 2022
    Posts
    21
    Quote Originally Posted by bmorgil View Post
    NAGC , first lower the transfer case cross member with four 1/2" thick spacers between the frame and the cross member bolts. Keep an eye on the firewall to engine clearance. as the cross member drops. If that isn't enough, then raise the body until it fits. I think dropping the cross member should do it. That will really help the drive shaft angles and the slip yoke engagement.

    Got it.....didn't even think about dropping the cross member. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •