4001901E-B685-4CAE-9032-D01178011594.jpg
Quote Originally Posted by bmorgil View Post
We truly need gmwillys to jump in here and see what he thinks.

I am going to say you have a 2A or 3A frame that someone put a body on. The confusing thing is the comments on the bell crank. On the very early jeep, the bell crank was on the axle. On the later models the bell crank was moved to the round cross member you mentioned. That almost makes me think it is a newer Military frame (the rear gas can mounts make me think military) because of the bell crank mount on the round cross member. I cannot see if it has the machine gun mount which would distinguish it from the civilian frame The front axle on the other hand has to be something early like an MB or very early 2A to have the bell crank on it.
Here is a clear shot of the frame and if I recall correctly the machine gun mount was a steel circle in the middle of the frame which I don’t have but please confirm. Fuel tank under the rear floor where the 3A frame had angled braces to me says DJ but like u said the front axle is confusing. NEed a little help!