Quote Originally Posted by bmorgil View Post
Looks great 56', you are doing well and making excellent progress. The body tub is very close to the transfer case. The rubber body mounts should be just enough lift to clear the transfer case by a "little". Some are closer than others. It will be close when it is all set in place but, not touching. You need a minimum of 1/4" to keep the two apart during motion. Various thickness of body mounts are out there, you can also make your own.
I was already planning on making my own body mount bushings, since the tubing i used in place of hat channels may not be the same thickness as original. But i'll probably reshape the tunnel alittle bit anyways just to be sure. I'd hate to get it painted and reassembled then find out the overdrive doesn't fit. And i have an ammo can i use as a center console so you can't see the tunnel at all, so it really doesn't matter if i had another hump in it.