Results 1 to 2 of 2

Thread: Solid state electronic ignition

  1. #1
    Junior Member
    Join Date
    Apr 2022
    Posts
    8

    Solid state electronic ignition

    I have heard somewhere in the community that many guys have had a problem with these COMPLETE SOLID STATE ELECTRONIC IGNITION DISTRIBUTOR 12 VOLT
    FITS 54-64 JEEP & WILLYS WITH 6-226 ENGINE, I think my original distributor has served its purpose for 63 years, old and worn out. I would like to go with this electronic distributor. Its at a high dollar item for me being Canadian, 35% exchange rate on the dollar. So I guess my question is will I have any foreseen problems installing this electronic distributor? Thanks

  2. #2
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,559
    SW, I am not real fond of the imported distributor. I did purchase two of them from two different suppliers. They both appear to be made by the same manufacture. There have been persons who have had trouble with them. I did send them both back. I ended up rebuilding my original with components from various suppliers, and converted it to a Pertronix electronic ignition https://cdn.shopify.com/s/files/1/02...f?v=1608310495. I was not comfortable with the "look" and the origin of the manufacture of the aftermarket distributor.

    You could try one or, rebuild your original. If you don't want to do it yourself, you could call or contact http://www.willysdistributors.com/ They can rebuild the old one for you or, I am pretty sure they can convert it for you to an electronic if you want someone to restore it for you.
    Last edited by bmorgil; 04-08-2023 at 11:13 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •