1957 F-134, and wanting to fix up the oil system. Specifically, replace the oil filter canister because the mounting brackets are broken, and also install new lines. I want to change the fittings so that it'll be easier to take the canister off when changing the oil so that I can empty the canister. I do a yearly oil change so the canister ends up with some pretty bad/sludgy oil inside of it.

Here are some pictures of my current engine and what I saw online for what I'd like to do. Removing the old brass fittings was challenging, I had to use vice grips and virtually ended up rounding off the heads they were so badly worn.

https://willysjeepforum.kaiserwillys...1&d=1702939271

https://willysjeepforum.kaiserwillys...1&d=1702939401


I can't tell if these are some kinda quick connect or hand-turn to release fittings, but this looks like the kinda fittings I want to go with at least on the canister. The hoses can be whatever as I won't really be messing with those.
https://www.jeepforum.com/attachment...58-jpg.650446/


Hope this makes sense, I use it for work, it is not a show piece. But I'm trying to replace some things that are causing a lot of oil to end up on the ground.