Just joined today after picking up a 1954 2 dr Wagon with the 4 cylinder, 4x4 this weekend. I have a lot to learn about these but ready for a good project. It is in decent shape. Not looking to restore but get it back mechanically sound to drive around. It runs but barely and smokes, will need a rebuild to get it back to normal. Running gears and 3 speed trans seem to be okay. Any ideas on different options of obtaining a rebuild kit? Thinking this is the F34 motor. I see different prices on rebuild kits depending on where you get them. Thanks!
Welcome, glad to have you on board. It's always good to see a new member join the willys community. That looks to be a very solid start to a project. Being 1954 you should have an f head I believe. This is a great site with some truly knowledgeable folks who will help you with any problems you run into. Keep us updated with any progress. Theses little willys engines are very simple. And if the rest of the drivetrain and body is solid. It shouldn't take you long before it's out on the road again.
" It runs but barely and smokes, will need a rebuild to get it back to normal."
That sounds typical. Start with engine fluid changes, ignition tune up and a carburetor rebuild. Change out the lube in all of the gearboxes - strange things lurk in the bottom of gearboxes.
Once you get past that, give the engine a good looking over and see how bad compression is and go from there.
Welcome! Man that is one fine looking wagon there! You are going to love the project. I love that wagon. gmwillys on this forum, is putting one back together right now. I left you some suggestions on your other post. https://willysjeepforum.kaiserwillys...3016#post23016
Thanks for the help! Yeah, so someone tried to save this wagon yrs ago. The good and the bad is they put a rhino liner coating which overt time hides rust. I recently just fell for the look of these although I am not a jeep guy. They just look cool! I want to get the main things working so i can drive it short range. Its a pre-retirement project.
I was hoping someone could tell me about this Wagon I just purchased. It is supposed to be a 1954, but wondering based on previous registration documents? Also, can you tell by the pics if this is the original engine. It appears to be the F-head 134, just wasn't sure if it was the original motor. Also the engine ID plate to me makes out on the model # as (1FU 4F) from what I can tell. Any info would be appreciated. It wont let me post pics here. but I have them in the other forum for technical. Thanks again!
It does look like you have a good start to a project. As Bmorgil said, I'm in the process of welding in new floors in our wagon when time permits. LarrBeard has put up some good starting places to see what you have going on, and Bmorgil has you set up with some good internal engine advice. Both will offer up great advice, and they know what they are talking about.