Results 1 to 6 of 6

Thread: Dana 18 Transfer Case Mount?

  1. #1

    Dana 18 Transfer Case Mount?

    Hey All,

    Removed this T90 and there was no transfer case mount on the flange shown in pic. Assuming there should be one? I did have the 2 transmission mounts. Looks like PN 926671K on KW possibly? Thanks for any help!

    20240303_125424.jpg

  2. #2
    Also missing the bracket on the crossmember for this transfer mount insulator. Anyone have a pic of that?

  3. #3
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,775
    At least the center mount for the transmission are in place. The one on the right side is a single bolt with a conical rubber mount. Enclosed is a photo of our wagon without the drivetrain installed, and a link to the replacement rubber mounts. If you are missing the bracket on the cross member, then you will have to fabricate your own bracket because I am not aware of anyone who reproduces it.

    https://www.kaiserwillys.com/product...-6-226-engine/
    Attached Images Attached Images

  4. #4
    Senior Member
    Join Date
    Feb 2021
    Posts
    109
    I needed one of these cross member brackets awhile back and found one with Midwest Willys:

    (765) 362-2247

    Harry & Jo Sheets
    3708 S. 100 E.
    Crawfordsville, IN 47933
    email: MIDWESTWILLYSLLC@GMAIL.COM

  5. #5
    Thanks All! Yes, closer to figuring this out now. There are only 2 trans mounts right on the T90 and then this on the transfer case, nothing else Im missing?

  6. #6
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,806
    I think you got it JW!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •