Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Greetings everyone. First jeep ever!

  1. #11
    Junior Member
    Join Date
    Apr 2024
    Posts
    8
    I’ve got three projects to start with: wiring the back license plate for the light, installing and wiring the wiper motors, tracking down a leakage from the transfer case (hopefully only the fill plug and seal).
    Who is a good reputable source for electrical diagnostic equipment in case I need to replace what I have. Timing light, ammeter, etc.

  2. #12
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,783
    A couple of questions in regard to how your M38A1 is configured? Is the electrical system still 24 volt? Are you running the waterproof plugs and wires? The waterproof wires require an adapter to go in between the plug and wires for a timing light. You can pull the waterproof plug wire and spark plug and replace it with a conventional plug and wire so you can use an induction pick up clamp of a traditional timing light. A conventional timing light can be used, but ensure that you only hook the power lead to the 12 volt lead of the battery set. This will work with the ignition timing, but if you wish to check your dwell, then you'll need the engine ignition timing set.

    https://shop.midwestmilitary.com/pro...light-adapter/

    https://secoparts.net/products/adapt...trical-7541281

    http://www.willysmjeeps.com/v2/modul...845&highlight=

  3. #13
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,832
    There are a few good sources for Automotive testing equipment. In the end it is the brand name and place of manufacture you are looking for. You can shop prices at a lot of places. I am very fond of Fluke when it comes to Multi-Meters. I always try to buy USA or Japanese testing equipment. You will need a Multi-Meter. It does not have to be a Fluke or an expensive meter. Your electrical work will be basic. You will not need precision accuracy. An inexpensive Multi-Meter will definitely do the job. For the timing, it is best done by setting the Timing when the points open and referencing the Flywheel markings, no timing light is required. If you want to use a light, follow gm's suggestions. You can use your Multi-Meter to detect the instant the points open. The dwell is directly affected by the point gap. This is best set with a good feeler gauge. A dwell meter can be used to see if the points are operating correctly, but it is not absolutely needed.

    Here is an Automotive Equipment source:

    https://www.esitest.com/
    Last edited by bmorgil; 05-07-2024 at 06:50 AM.

  4. #14
    Junior Member
    Join Date
    Apr 2024
    Posts
    8
    It runs a 12 volt system. At some point I’d like to do the waterproof system if practical. Thank you for the input fellas.

  5. #15
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,783
    12 volts make life a lot less troublesome. Most of the reason for folks to convert from 24 to 12 is mainly the costs involved with replacement parts.

  6. #16
    Junior Member
    Join Date
    Apr 2024
    Posts
    8
    How do I post several pictures on here? I’m using an I-pad. I’m trying to select several pictures to upload at the same time but only one will upload out of photo library. I tried the photo icon but only allows one upload.

  7. #17
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,783
    Unfortunately, you can only upload one photo at a time into the attachment manager. Once it's in your manager, you can add four more photos for a total of five.

  8. #18
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,832
    This might help. The amount of pic's you can upload at a time is limited as gm said. There are a few things to keep in mind. Check this link for some info.

    https://willysjeepforum.kaiserwillys...re-in-a-thread

  9. #19
    Junior Member
    Join Date
    Apr 2024
    Posts
    8
    Sorry about the delays, lots of irons in the fire at this time, this jeep is helping me to prioritize what is important in my life and it is one of the top items. Now for a “where do these whatchamacallits” go? Each wiper motor comes with two rubber grommets, Nothing specified as to specifically where they go, unless I’m being blind again in not looking hard enough.

  10. #20
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,783
    The TM manual and associated information for the wipers are linked here;

    http://www.willysmjeeps.com/v2/modul...ght=wiper+hose

    *

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •