Page 40 of 41 FirstFirst ... 3038394041 LastLast
Results 391 to 400 of 407

Thread: Hodakaguy M38 - Pics and Misc Thread.

  1. #391
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Continued from above....

    Here I removed some paint on the rear fuel tank mounting tab so the tank will ground properly. The fuel sender needs a proper ground or it won't function.




    And a coat of corrosion inhibitor




    Let's get the gaskets in place.




    I'll be using Permatex Permashield (Similar to Hylomar) to dress the gaskets and prevent fuel from weeping onto the top of the fuel tank.




    Continued Below...

  2. #392
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Continued from above...


    The dressing is applied to both surfaces then let sit for a while for the solvents to flash off. After that it's ready for assembly.








    Dressing applied to the screw threads as well




    Continued Below...

  3. #393
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Continued from above...






    Tightening up the fuel time behind the tank, the fitting is recessed so I had to get creative to tighten it :-)






    Continued below....

  4. #394
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Continued from above...




    Seat Back in....It's a M38 Again!




    Dad and I out on a test drive. It shifts and drives great! No more popping out of 2nd gear on decel! After driving it around quite a while there isn't a single drip under the Jeep....hopefully it stays that way :-)






    Continued below....

  5. #395
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    continued from above...









    Video of the test drive today...sooo much fun! Apologize for the weird audio feedback and the rattle from the rear seat :-)

    https://www.youtube.com/watch?v=b-jdIbxYAxQ


    Hodakaguy

  6. #396
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,976
    That is just fantastic! What a great ride. The M38 is a concourse restore. Great job!

  7. #397
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Quote Originally Posted by bmorgil View Post
    That is just fantastic! What a great ride. The M38 is a concourse restore. Great job!

    Thanks Mate.

    Hodakaguy

  8. #398
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Fixing some rattles.

    The rear seat has a rattle sound coming from the seats, after pulling back the cover you can see where the springs are wearing against the metal backing. If you slap the seat with your hand you can hear the springs rattle against the base.






    I decided to cut some pieces of rubber drawer liner to install between the springs and the bases to keep the two apart and dampen any vibrations. The holes in this material will allow it to breath and not trap moisture under the rubber.






    Continued below....

  9. #399
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Continued from above....










    Continued below....

  10. #400
    Senior Member
    Join Date
    Apr 2024
    Location
    Eastern WA State
    Posts
    340
    Continued from above...






    Out for a parts run to snag some GL4 90W oil and some lunch at Jersey Mikes :-)






    Continued below...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •