Results 1 to 3 of 3

Thread: Will F4-134 engine fit in CJ3A

  1. #1
    Junior Member
    Join Date
    Mar 2013
    Posts
    1

    Will F4-134 engine fit in CJ3A

    I have a 1951 CJ3A. Is there an easy way to install A F4-134 engine in it.I know it will bolt in ok but as you know it is too tall for hood to clear carb.I was wondering what modifications would be best and if anyone has done this.
    Thanks for any info.
    Mike

  2. #2
    Senior Member
    Join Date
    Sep 2012
    Location
    California
    Posts
    277
    Put a straight six in my 48 PU but there was no height clearance issues. I was however able to adjust the height because I put whole new engine mounts in. Not sure if there is a way to do that with your sotck mounts though. You can go to my profile, photo album, engine mounts and see the engine mounts I made. Might give you some ideas.
    Last edited by 1948 Cal Willys Pickup; 03-29-2013 at 07:41 AM.

  3. #3
    Junior Member
    Join Date
    Aug 2012
    Location
    MELBOURNE AUSTRALIA
    Posts
    13
    HI --- Have heard that you can!!!! but i would do some measure up before doing it. The carburetor is replaced with a solex unit
    not sure of the model number, a few jeep owners replace with a solex carburetor
    RON

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •