Page 169 of 252 FirstFirst ... 69119159167168169170171179219 ... LastLast
Results 1,681 to 1,690 of 2512

Thread: well, the darn thing is out

  1. #1681
    Senior Member pelago's Avatar
    Join Date
    May 2016
    Location
    easter north carolina
    Posts
    1,261
    windshield1.jpgwindshield2.jpg


    got to thinking if i bust a piece of glass it is on me but if a glass house does it is on them
    100 bucks later

  2. #1682
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,816
    Nice work!

  3. #1683
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,780
    Looks great!

  4. #1684
    Senior Member pelago's Avatar
    Join Date
    May 2016
    Location
    easter north carolina
    Posts
    1,261
    Moving on, i removed the old vacuum motors and they are toast. need to be rebuilt/replaced, got all the rest of the fittings the hose connectors and such. have seen some vacuum motors on ebay, one was new old stock?? comments??

  5. #1685
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,780
    The new old stock would be iffy. The rubber diaphragm may be dried out and will leak on something that has been sitting on the shelf for 60 plus years. Might want to look into rebuilding what you have.


    https://www.youtube.com/watch?v=UQ_MMKfhSwM

    http://oldholden.com/node/95377

  6. #1686
    Super Moderator LarrBeard's Avatar
    Join Date
    Nov 2014
    Location
    Ft. Wayne, IN
    Posts
    2,555
    This guy rebuilt the motor on the '48.

    https://rebuildingtricowipers.com/

    Make sure your vacuum booster on the bottom of the fuel pump is working.

  7. #1687
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,816
    LarrBeard, I was looking for a "new" rebuild kit for mine with little success. I have an old NOS kit. Like gmwillys, I wonder how good it is. I also have a NOS motor. It actually is working. It's Olive Drab, military stock for sure. I lubed it with light machine oil. Do you think I should "let it ride"? I wonder if I should just send it off to your guy. Was he expensive?

  8. #1688
    Super Moderator LarrBeard's Avatar
    Join Date
    Nov 2014
    Location
    Ft. Wayne, IN
    Posts
    2,555
    Let it ride. If it's working, resist the urge to fix it until it doesn't.

    Light oil or brake fluid seems to be a good lube for the flapper gaskets that ride on the sides of the U-shaped well. I suspect brake fluid may make them swell up a bit and seal better. In some motors, on the flapper, there is an unobtainium leather washer and a light spring that die.

    And, like everyone who has a corner on the market - he's not cheap - but he does offer a 3-year warranty.

  9. #1689
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,816
    OK going to paint it black and let it ride. I used machine oil because I am afraid brake fluid will drip out on my paint. I agree with your logic however. Brake fluid would swell up much better. I read that brake fluid is the original method the factory required. Every 3 months! Then I read that Ford put out a tech that on the Model A they wanted you to switch to machine oil do to the paint issue.

    Now... I have been googling to see what the, and trying desperately to learn to pronounce "unobtainium leather". It is my new word of the year. So you have fine Corinthian leather interior in your car? Well I have Unobtainium leather in my wiper motors! LarrBeard that word is priceless.

  10. #1690
    Super Moderator gmwillys's Avatar
    Join Date
    Aug 2017
    Location
    Alabama
    Posts
    3,780
    Unobtainium is a perfect term around here. I see it used constantly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •