-
Super Moderator
That's good data. The cold to hot ratio is about 3:1, which looks about right for a ratio. On the sensor that I am adapting for the '48, cold is about 100 ohms and 165-degrees is 33 ohms; close to 3:1.
What does the gauge read with the cold sensor connected?
Do you have a new gauge to check things with?
The answer may be a series resistor to cut current back when the sensor is hot.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules