-
Super Moderator
If that is a Dana 23 and not a Timken that changes everything. Take some pictures of the pinion to drive shaft connection. I'll get back to you after I see some pictures. Good thing Wasilla is paying attention!
I missed that part of gmwillys post! Getting stir crazy.
Last edited by bmorgil; 05-06-2020 at 06:35 AM.
-
Super Moderator
This is the end yoke you need to put in a 1310 series Spicer U-Joint. https://www.kaiserwillys.com/pinion-...-41-44-53-rear The 23 should use the same yoke as the 25, 41 etc. The yoke you found should also work. Lets see what you have first. I was thinking it was hooked up like Larry's. I can't believe I missed that in gmwillys post. He pumps out so much info it's hard to catch it all!
We will need some good photos of the underside, specifically the drive line. This is fairly straight forward if it is a 1 piece driveshaft.
Last edited by bmorgil; 05-06-2020 at 07:44 AM.
-
Super Moderator
I get that a lot when I ramble on. The Long Suffering Misses tunes me out after the first couple of minutes of dialogue as well, so I'm used to it..... Bmorgil has you on the right path now.
Frames are out there but usually by the time you find one available, they are in sad shape. The following links can lead you to some resources to post up on for a frame search, or any other specific information that is unique to the first gen Jeepster.
https://www.midstatesjeepster.com/index.html
https://jeepsterclub.com/
http://www.ewillys.com/?s=jeepster
-
Super Moderator
More like you give out a lot of good stuff gmwillys! Sometimes I need to read it twice
-
Hi Is there any difference between the 2WD Jeepster and Wagon frames?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules