You could TJ, just be sure to pull the fill plug on the transfer case. You will need to keep filling the transmission until lube comes out of the fill hole on the transfer case.
https://willysjeepforum.kaiserwillys...ght=lube+level
You could TJ, just be sure to pull the fill plug on the transfer case. You will need to keep filling the transmission until lube comes out of the fill hole on the transfer case.
https://willysjeepforum.kaiserwillys...ght=lube+level
Absolutely. Bmorgil is right to pull the transfer case fill plug. The wide open transmission cover would be a whole lot easier then trying to weasel in to the fill plugs. On our 2A, it doesn't like to be full to the plug. It will leak out the input shaft until it gets to the level it likes when driving. The transmission doesn't leak while parked.
Thanks Guys!!!
It will be a heck of a lot easier that way.
Here is the double lip seal and the speedy sleeve i got for the Dana 18 rear yoke just in case anyone needs to put one on theirs.
IMG_3592.jpg
IMG_3590.jpg
Thanks for posting the parts you used.
Jeff
'51 CJ3A
'47 CJ2A
I'm going to stock up for both the heeps. We don't have any good local sources that you can step up to the counter to match up a pile of seal and bearing remnants to match up for cheap. Thank you TJ!
Beautiful day for a joy ride!!!
Happy Memorial Day to all who have made it possible to joy ride in Freedom.
Thank You!!!
Last edited by TJones; 05-31-2021 at 03:07 PM.
Took my pickup in Wednesday to have it oil sprayed and the guy used a mixture of waste oil and bar oil for the nukes and crannys then he used Fluid Film on the wide open areas.
He said they came out with a new Fluid Film that’s black and I’m telling you it looks like he painted everything underneath black, damn I should of done this when it was new it turned out pretty sweet
Had to park it in the gravel for a couple days while it dripped out but all and all I was very pleased for $120.00!!!
Last edited by TJones; 06-27-2021 at 05:05 AM.