Results 1 to 3 of 3

Thread: Frame Paint?

  1. #1
    Junior Member
    Join Date
    Apr 2020
    Location
    Central Washington State
    Posts
    24

    Frame Paint?

    Hello all,

    I am entirely new to any sort of auto restoration. I bought my great grandfather's 1955 CJ5, and I have been attempting to rescue it and bring it back to driving and usable condition. I have it taken apart in my garage and I have been working on removing rust from the frame with an angle grinder. I have been researching options for frame paint, and I'm kind of at a loss for what to go with. My inclination as of now is to use POR15 on the inside parts and angles where I can't get every little bit of rust off and to use some sort of enamel frame paint on the bulk of the frame, which I am getting down to bare metal for the most part.

    Does this sound like a viable way to restore and preserve the frame? What products can you recommend? I am open to suggestions and hoping to benefit from others' experience!

  2. #2
    Super Moderator bmorgil's Avatar
    Join Date
    Dec 2018
    Location
    Northwestern Ohio
    Posts
    3,805
    alove, there are a few conversations on this somewhere! If you search for frame paint you will find a few. I really like Rust-oliem. I put it on over Rust-oliem primer and bake it in the sun or under infa red heat. Where I cant get I use Eastwood internal frame coating and rust converter. Rust-Oliem stays fairly soft and doesn't tend to flake off from road impacts.
    Last edited by bmorgil; 07-01-2021 at 12:50 PM.

  3. #3
    Junior Member
    Join Date
    Apr 2020
    Location
    Central Washington State
    Posts
    24
    Thanks, I'll check out the other threads. I appreciate the recommendation!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •